Core Router Health Inspection

Purpose

Test   core router health status

Procedure

1.       Connect the   Console cable and check the basic CPU and memory usage information with   command of “display health”;

2.       Check the fan   information with command of “display   fan”;

3.       Check the   power status with command of “display   power”;

Expected Results

1.     Show the   device cpu and memory usage information

<HUAWEI>display health
  ----------------------------------------------------------------
  Slot CPU Usage Memory Usage(Used/Total)
  ----------------------------------------------------------------
  clc1/21 MPU(Master) 1% 8% 2632MB/31719MB
  clc1/2 LPU 17% 5% 928MB/15910MB
  clc1/11 LPU 17% 5% 945MB/15910MB
  clc1/12 LPU 17% 5% 915MB/15910MB
  clc1/23 SFU 8% 8% 86MB/980MB
  clc1/24 SFU 8% 8% 86MB/980MB
  clc1/25 SFU 8% 8% 86MB/980MB
  clc1/26 SFU 8% 8% 86MB/980MB
  clc1/27 SFU 8% 8% 86MB/980MB
  clc1/28 SFU 8% 8% 86MB/980MB
  clc1/29 SFU 8% 8% 86MB/980MB
  clc1/22 MPU(Slave) 1% 6% 1926MB/31719MB
  ----------------------------------------------------------------

2.     Show the   fan information as below

<HUAWEI>display  fan

Slotid      : FAN1

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

    [4] 30%  [5] 30%  [6] 30%

Slotid      : FAN2

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

    [4] 30%  [5] 30%  [6] 30%

Slotid      : FAN3

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

    [4] 30%  [5] 30%  [6] 30%

Slotid      : FAN4

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

    [4] 30%  [5] 30%  [6] 30%

Slotid      : FAN5

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

  [4] 30%    [5] 30%  [6] 30%

Slotid      : FAN6

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

    [4] 30%  [5] 30%  [6] 30%

Slotid      : FAN7

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

  [1] 30%    [2] 30%  [3] 30%

    [4] 30%  [5] 30%  [6] 30%

Slotid      : FAN8

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

    [4] 30%  [5] 30%  [6] 30%

Slotid      : FAN9

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

    [4] 30%

Slotid      : FAN10

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

    [4] 30%      

Slotid      : FAN11

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

    [4] 30%

Slotid      : FAN12

Present     : YES

Registered: YES

Status      : AUTO

FanSpeed    : [No.]Speed

    [1] 30%  [2] 30%  [3] 30%

  [4]   30%

3.     Show the power   status information

<HUAWEI>display  power

No.    Present Mode State                                   Num                  

-------------------------------------------------------------------------------

PWRA Yes     DC     Normal                                  Abnormal(0)/Normal(8)  

Power monitor cable state:   Plug

Results

The   device health information will be shown

Pass   □

Fail   □

The   device FAN status will be shown

Pass   □

Fail   □

The   device power information will be shown

Pass   □

Fail   □

Remark