Got it

Core Router Device Inspection

914 0 8 0 0

Purpose

Test   core router component status

Procedure

1.       Insert all the   power modules and mother cards/sub cards, then power on the core router;

2.       Connect the   Console cable and check the device status with command of “display device

3.       Check all the   SSD and memory information with command of “display version slot clc1/21” and “display version slot clc1/22”;

Expected Results

1.       All the power   module and cards register successfully:

<HUAWEI>display device

NE9000-20's Device status:

---------------------------------------------------------------------------------

Slot #       Type    Online     Register     Status     Role     LsId   Primary     

---------------------------------------------------------------------------------

clc1/2       LPU     Present    Registered   Normal       LC     0      NA          

clc1/11      LPU     Present    Registered   Normal       LC     0      NA          

clc1/12      LPU     Present    Registered   Normal       LC     0        NA          

clc1/21      MPU     Present    Registered   Normal       MMB    0      Slave       

clc1/22      MPU     Present    Registered   Normal       MMB    0      Master      

clc1/23      SFU     Present    Registered   Normal       OTHER  0      NA          

clc1/24      SFU     Present    Registered   Normal       OTHER  0      NA          

clc1/25      SFU     Present    Registered   Normal       OTHER  0      NA          

clc1/26      SFU     Present    Registered   Normal       OTHER  0      NA           

clc1/27      SFU     Present    Registered   Normal       OTHER  0      NA          

clc1/28      SFU     Present    Registered   Normal       OTHER  0      NA          

clc1/29      SFU     Present    Registered   Normal       OTHER  0      NA          

clc1/35      CLK     Present    Registered   Normal       OTHER  0      Slave       

clc1/36      CLK     Present    Registered   Normal       OTHER  0      Master      

clc1/PWRA    PWR     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN1    FAN     Present      Registered   Normal     OTHER    0      NA          

clc1/FAN2    FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN3    FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN4    FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN5    FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN6    FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN7    FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN8    FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN9    FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN10 FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN11 FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/FAN12 FAN     Present    Registered   Normal       OTHER  0      NA          

clc1/CMU1    CMU     Present    Registered   Normal       OTHER  0      Slave       

clc1/CMU2    CMU     Present    Registered   Normal       OTHER  0      Master      

---------------------------------------------------------------------------------

2.       Show the version   information of the slot:

<Huawei>display version slot   clc1/21
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  MPU version information:
 
  MPU (Master) clc1/21 : uptime is 1 day, 18 hours, 41 minutes
  StartupTime 2017/11/06 19:32:19
  SDRAM Memory Size : 32768 M bytes
  FLASH Memory Size : 16 M bytes
  NVRAM Memory Size : 512 K bytes
  CFCARD Memory Size : 30721 M bytes
  MPU CR9D0MPUN180 version information
  PCB Version : CR58MPUN REV C
  EPLD Version : 105
  FPGA Version : 109
  BootROM Version : 06.36
  BootLoad Version : 43.14
  MonitorBUS version information:
  Software Version : 230

 

<Huawei>display version slot clc1/22
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  MPU version information:
 
  MPU (Master) clc1/21 : uptime is 1 day, 18 hours, 41 minutes
  StartupTime 2017/11/06 19:32:19
  SDRAM Memory Size : 32768 M bytes
  FLASH Memory Size : 16 M bytes
  NVRAM Memory Size : 512 K bytes
  CFCARD Memory Size : 30721 M bytes
  MPU CR9D0MPUN180 version information
  PCB Version : CR58MPUN REV C
  EPLD Version : 105
  FPGA Version : 109
  BootROM Version : 06.36
  BootLoad Version : 43.14
  MonitorBUS version information:
  Software Version : 230

Results

All the power module and cards register   successfully

Pass  

Fail  

The slot   information will be shown

Pass  

Fail  

Reamrk

 


  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.