Got it

Controlling the traffic by ACL about HU - a simulation experiment in eNSP

Latest reply: Sep 14, 2015 05:55:30 3290 1 0 0 0

This post is about controlling the traffic by ACL about HU - a simulation experiment in eNSP. Please see more details below.


traffic-policy apply to interface normally, but it can not forbid the traffic from CLIENT1 to CLIENT2 when traffic-policy apply to VLAN, what's wrong?


55f6377347613.png


acl name vlan30_inbound
rule 5 permit ip source 20.0.0.0 0.0.0.255 destination 30.0.0.0 0.0.0.255
rule 10 deny ip
#
traffic classifier vlan30_inbound
if-match acl vlan30_inbound
#
traffic behavior vlan30_inbound
permit
#
traffic policy vlan30_inbound match-order config
classifier vlan30_inbound behavior vlan30_inbound
#
vlan 30
traffic-policy vlan30_inbound inbound

interface g0/0/1 
traffic-policy vlan30_inbound inbound

  • x
  • convention:

user_2790689
Created Sep 14, 2015 05:55:30

Thank you.
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.