Console access to switch.

Latest reply: Dec 24, 2018 17:09:30 571 9 0 0
Is this possible to prevent user access through console port to switch CLI? With other words - made console port off.
  • x
  • convention:

rociot
Created Nov 20, 2018 15:56:14 Helpful(0) Helpful(0)

Hi.

By default, the administrator can log in to a switch through the console port. If the console port login function is not required, you can run the console0 disable command to disable this function. If this function is required, you can run the undo console0 disable command to enable this function.

# Disable the console port login function.
<HUAWEI> system-view
[HUAWEI] console0 disable

:)
  • x
  • convention:

Spectrum
Spectrum Created Nov 22, 2018 07:58:29
Hi! Thank you for reply! But unfortunately this did not work for my switch. VRP (R) software, Version 5.170 (S5720 V200R010C00SPC600) Error: Unrecognized command found at '^' position.  
Fernandoizsa
Created Nov 22, 2018 14:43:22 Helpful(0) Helpful(0)

can you confirm the current VRP of your switch ?
  • x
  • convention:

rociot
Created Nov 22, 2018 15:26:27 Helpful(0) Helpful(0)

Hi Dear, so for your version, it doesn't exist command but you can configure port console security, please check following link: http://support.huawei.com/hedex/ ... 2Fb%253E%2BPort This post was last edited by rociot at 2018-11-22 15:27.
  • x
  • convention:

littlestone
Created Nov 27, 2018 06:35:41 Helpful(0) Helpful(0)

Serial interface, also known as serial communication interface or serial communication interface (usually referred to as COM interface), is an extended interface using serial communication mode. Serial Interface (Serial Interface) refers to the sequential transmission of data one by one. Its characteristic is that the communication line is simple, so long as a pair of transmission lines can realize two-way communication (telephone lines can be used directly as transmission lines), thus greatly reducing the cost, especially for long-distance communication, but the transmission speed is slow.
  • x
  • convention:

WheatGrass
Created Nov 29, 2018 03:53:11 Helpful(0) Helpful(0)

console disable

Function:

The console disable command disables a user from logging in to the AP through a console interface only.

The undo console disable command enables a user from logging in to the AP through a console interface.

By default, a user can log in to the AP through a console interface
  • x
  • convention:

Spectrum
Created Dec 5, 2018 07:18:32 Helpful(1) Helpful(1)

Thank you all. Problem is solved. I've told to customer that we can't turn off console port, only set a password.
  • x
  • convention:

4am
Created Dec 24, 2018 09:44:13 Helpful(0) Helpful(0)

Setting the password is the same as disabling the port. You are very resourceful.
  • x
  • convention:

3li
Created Dec 24, 2018 17:09:30 Helpful(0) Helpful(0)

It's useful
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login