Connectivity test

Chenxintao · Created Sep 12, 2021 01:50:40

Hello, friend!

Partial connectivity indicates that an NE has two or more protocols. During the connectivity test, at least one protocol fails to be connected. As shown in the following figure, the NE uses SNMP and Telnet. Telnet fails to connect to the NE, but SNMP succeeds. The NE connection status is partially connected.

Choose My NEs > Select Columns and add protocols whose connection status needs to be displayed.

If a protocol is not connected, the uNIC cannot collect data using the protocol.

Thanks!

chenhui · Created Sep 12, 2021 01:10:17

Hello,
Kindly wait for a second, we'll feedback to you ASAP.

Chenxintao · Created Sep 12, 2021 01:50:40

Hello, friend!

Partial connectivity indicates that an NE has two or more protocols. During the connectivity test, at least one protocol fails to be connected. As shown in the following figure, the NE uses SNMP and Telnet. Telnet fails to connect to the NE, but SNMP succeeds. The NE connection status is partially connected.

Choose My NEs > Select Columns and add protocols whose connection status needs to be displayed.

If a protocol is not connected, the uNIC cannot collect data using the protocol.

Thanks!

Connectivity test

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Connectivity test

Recommended answer

Third Party’s Trade Secret

My Followers