Some remote ROADM sites require two or more DCM modules, which have significant attenuation. Two or more OA boards are needed. In this case, the connecting points of DCMs should be reasonable for the system to run normally.
The adjustable value is 11 dB. When DCMs F and A are connected to the TDC and RDC ports of the OAU board, the insertion loss between the two DCMs reaches 13.1 dB, resulting in insufficient OAU amplifying capability and low output optical power.
The issue can be resolved by placing one DCM behind the OBU board, and the other between the TDC and RDC ports of the OAU board.
When two or more DCMs are used, the attenuation should be considered, and the location of DCMs and OA boards should be arranged reasonably.
Connecting multiple DCMs and OA boards
Created: May 5, 2021 01:23:41Latest reply: May 6, 2021 07:52:52
348
6
2
0
0
- x
- convention：
- Emotion(0)
|
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
