This post talks about connecting eNSP to XSHELL. Please see more details below.
1. Firstly, start the equipment of a Huawei simulator.
2. Open the XSHELL software, click File and then click New to create a new session.
3. Then, on the top of the window, select the option of TELNET, which must be TELNET protocol to connect.
4. Then, fill in all the information, including Name, IP address of the host and port number. Names are customizable; The IP address of the host is the IP address of the machine, and the default is 127.0.0.1; Port number must start from 2000, if there is a second device, then start from 2000 and continue to accumulate, 2001,2002 and so on.
5. After setting the options, it's time to connect. First click File, then press Open and a window will pop up automatically.
6. Select the first device, which starts from the default port 2000 and will be attached with the device you just named. Finally click link. As shown in the figure.