Connecting a huawei b310s-927 router to a Cisco router

Hello,

Currently, we provide services for Huawei Enterprise products, such as AR routers, series switches, servers, storage devices, and firewalls.
For assistance needed regarding Mobile Broadband, Mobile phone or Home devices, we advise you to check the Huawei support website for consumer, which also contains direct hotline phone numbers where you can contact our colleagues from the Consumer Business Group, which are able to help you solve your issues: http://consumer.huawei.com/en/contact-us/index.htm?tag=hotline
If the information that you are seeking cannot be found there or if the country where you are currently located is not included on our website, please contact our colleagues by sending an e-mail to mobile@huawei.com.
Most probably you need to know how to configure NAT on the router, but I'm not sure how.

Hi,

B301s is a consumer product. Please contact https://consumer.huawei.com/en/support/ for further support as we now provide services for Huawei Enterprise products, such as AR routers, series switches, servers, storage devices, and firewalls.

Sorry for any inconvenience caused.

hi,
As you described,Huawei router is giving out IP to the Cisco router through DHCP,and you can do a ping from the LAN to the port connecting the Cisco router and also to the Huawei router default IP.This situation can prove that inter-connect are correct. I just searched the b310s documentation, and learned that b310s just have only one Ethernet port, I suppose you check if you connected the wire correctly.

Can we make it wireless reapeter