Connect to BTS or BSC from CLI

Neil_Tong · Created Aug 1, 2019 01:00:48

Dear user,

Yes, there is only the Linux command available on the OMU system.

If you cannot log in to the WEBLMT, LMT client or U2000, the command of the MML format cannot be executed either.

Neil_Tong · Created Jul 31, 2019 06:59:21

Hi dear!

The CLI you refered to is a command line interface? Generally, we must make sure that the network can ping from local device to BTS or BSC, then we can send the MML command.

So, if your transmission is no probelm and you want to execute the MML command without using U2000 or WEBLMT, you can try to log in to the local LMT client to execute the MML commands.

Of course, you can also use the serial port to connect to BSC or BTS. It will enter the command line interface and after that you can send the serial port command to implement some function that has the same effect as executing the MML command on the WEBLM or U2000.

Neil_Tong · Created Jul 31, 2019 06:59:21

Hi dear!

The CLI you refered to is a command line interface? Generally, we must make sure that the network can ping from local device to BTS or BSC, then we can send the MML command.

So, if your transmission is no probelm and you want to execute the MML command without using U2000 or WEBLMT, you can try to log in to the local LMT client to execute the MML commands.

Of course, you can also use the serial port to connect to BSC or BTS. It will enter the command line interface and after that you can send the serial port command to implement some function that has the same effect as executing the MML command on the WEBLM or U2000.

XLerebuX · Created Jul 31, 2019 10:22:49

Posted by Neil_Tong at 2019-07-31 00:59 Hi dear,The CLI you refered is command line interface? Generally, we must make sure that the network ...

Physical connection is ok, BSC is pingable, but which port on BSC is opened for telnet or ssh connection?

How to make login from command line of connected laptop OS (without LMT client)?

Neil_Tong · Created Jul 31, 2019 16:04:25

since you can ping the BSC IP, then directly open a ssh client (for example, PuTTY) on the computer and input the IP address that you can ping, next, use the root account to login it, after that, you can perform command on the putty

XLerebuX · Created Jul 31, 2019 21:59:47

Posted by Neil_Tong at 2019-07-31 10:04 since you can ping the BSC IP, then directly open a ssh client (for example, PuTTY) on the computer ...

I can login to OMU by ssh, but there only linux commands available. I am interested to execute MML commands (i.e. LST ALMAF:;). Is it possible from linux on OMU or there is other way to do it?

Neil_Tong · Created Aug 1, 2019 01:00:48

Dear user,

Yes, there is only the Linux command available on the OMU system.

If you cannot log in to the WEBLMT, LMT client or U2000, the command of the MML format cannot be executed either.

taikoThe · Created Oct 1, 2019 08:30:15

I think you can login to U2020 using 31114 port. This will get you to kind of MML service. There you can open the connection to any node and execute you MML commands

XLerebuX · Created Oct 2, 2019 10:27:40

Posted by taikoThe at 2019-10-01 02:30 I think you can login to U2020 using 31114 port. This will get you to kind of MML service. There you ...

I know about U2000 NBI Command interface, question was how to execute MML without U2000.

user_4034933 · Created Dec 31, 2020 17:21:49

Thanks for sharing

JOSEFRR · Created Jan 5, 2021 12:24:51

Good post

Connect to BTS or BSC from CLI

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Connect to BTS or BSC from CLI

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers