Configuring Link Aggregation in Manual Load Balancing Mode

326 0 0 0

Configuring Link Aggregation in Manual Load Balancing Mode

# Add 10GE1/0/1, 10GE1/0/2, and 10GE1/0/3 to Eth-Trunk 1 and configure Eth-Trunk 1 to work in manual load balancing mode.

<HUAWEI> system-view
[~HUAWEI] interface eth-trunk 1
[*HUAWEI-Eth-Trunk1] mode manual load-balance
[*HUAWEI-Eth-Trunk1] trunkport interface 10ge 1/0/1 to 1/0/3
[*HUAWEI-Eth-Trunk1] commit

 

You can also find the answer in Common Eth-Trunk Operations in Common Operation Guide.

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login