Configuring HG8247H in bridge mode

GongXiaochuan · Created Oct 8, 2018 07:50:59

1. telephone and cable TV cannot setting to bridge mode , i think your wireless router doesn't have CATV port or pots port .
2. for internet service ,change to bridge mode do as below steps :
a. delete the wan interface of internet service from the ONT webpage.
b. configure the ont port native vlan (user side vlan) in the OLT CLI

Gavin.Liu · Created Oct 18, 2018 11:08:39

very helpful !

NOA · Created May 8, 2019 10:00:14

Posted by GongXiaochuan at 2018-10-08 07:50 1. telephone and cable TV cannot setting to bridge mode , i think your wireless router doesn't have ...

Hi!
Your point "1" is not clear to me. Do you mean that if the bridge mode is setting, the CATV and the telephone will stop working? Or are you trying to say that the CATV and the telephone will continue to work on the HG8247H and the internet browsing will only work from the router that connects in cascade to the modem?
Thank you in advance for your clarification.

euromedia · Created Aug 4, 2020 20:58:15

I have a similar problem with the huawei router. Huawei HG8247H - ONT. I have configured Internet and
cable TV on this router. A website administered on a local computer does not have Internet access from the outside (local view only). In contact with the internet service provider, I received information that access to the site via the Internet can be provided using Bridge mode. This would unblock port 80 which must be open for HTTP protocol. Can you be precise in the process of deleting the existing WAN Internet mode and establishing a new one where port 80 would be open.

Configuring HG8247H in bridge mode

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Configuring HG8247H in bridge mode

Third Party’s Trade Secret

My Followers