Reading about Configuring Flow Label-based Load Balancing, found that for now "Currently, only the following techniques support flow label-based load balancing in an L2VPN scenario: static virtual circuit (SVC) and Martini virtual leased line (VLL), dynamic pseudo wire emulation edge-to-edge (PWE3), and Martini virtual private LAN service (VPLS)"
Any plans to add Kompella based VLL/VPLS support ?
The flow label is the 3rd-label refered on load-balance profile ?
[sw-lab-01-load-balance-profile-mpls]mpls field ?
2nd-label Second label hash arithmetic
3rd-label Third label hash arithmetic
dip Destination IP hash arithmetic
dmac Destination MAC hash arithmetic
sip Source IP hash arithmetic
smac Source MAC hash arithmetic
sport Source Port hash arithmetic
top-label Top label hash arithmetic
vlan VLAN hash arithmetic
<cr>