Configuring Basic Data for voice mail box

1. Log in to the web management system of the Unified Gateway U1900 series as the administrator.
2. Choose System > License Information.
   Allocate resource for VMS.

   1. Access the web management system, and choose System > Board Configuration.
   2. Right-click the MTU and choose Configure from the shortcut menu.
   3. On the MTU Parameter Configuration page, set the value for Number of VMS Channels and set Meeting board, 
      

The SD cards need to be initialized during the first use. To ensure compatibility, use the SD cards provided by Huawei.

1. Log in to a U1900 series unified gateway using the CLI and access the Config mode.
2. Delete the voice messages on the entire board.

   config oldvmsleavedata delete slotno slotno

1. Access the web management system, and choose System > Script Management.
2. Click the Script Management tab and verify that the VMS scripts listed in the following table exist.

   Script Name	Description
   vmsrecord	Used to record voice messages. Corresponds to script ..\Script\english\Voice Mail Record Script.txt.
   vmsaccesscode	Used to retrieve voice messages and customize personal greetings. Corresponds to script ..\script\english\Voice Mail Service Script\Voice Mail Access Script.txt.

   5. Create the prefix for leaving voice messages and VMS access code.
   

1. Access the web management system, and choose Trunk > Called Prefix Configuration.
2. Click Create, and set the prefix for leaving voice messages and VMS access code, as shown in Figure 2 and Figure 3.
   Figure 2 Creating prefix 91001 for leaving voice messages
   
   Figure 3 Creating the VMS access code 91002
   

1. Access the web management system, and choose User > Global Service. Click Configure next to VMS.
2. Click Create, and configure data according to Figure 4.
   Figure 4 Creating voice mailbox 0
   
3. Click OK.