Configure the node NTP and configure the server maintenance mode in the FusionCompute deployment scenario

Yolanda_617 · Created Dec 22, 2018 07:09:29

Great

xiaomumu · Created Dec 22, 2018 07:41:37

Hope to learn more

user_2915719 · Created Dec 22, 2018 08:40:02

Why it does not support FSM or FSA as an NTP server? Is there any confliction or what, I wonder.

DZKM · Created Dec 27, 2018 09:20:02

FusionCompute, you can configure NTP on the FusionCompute.

2Openstack integration deployment scenario, configure NTP on the Openstack side.

Configuring NTP on the portal in the case of a separate deployment scenario. The current fusionstorage only supports external clock sources and does not support FSM or FSA as an NTP server.

1 If the server is not set to maintenance mode, the node will be kicked out of the cluster and restarted after 30 minutes of power-off.

2 If the node is powered off after being set to maintenance mode, the node will be kicked out of the cluster and restarted after 75 minutes.

3 If the hardware failure cannot be repaired within 75 minutes, cancel
！！！！

o.alshafaey · Created Jan 15, 2019 12:00:12

Greate that's a good solution

little_fish · Created Jan 11, 2020 02:52:16

good case!

user_4326135 · Created Dec 15, 2021 12:31:02

Good case post. Useful indeed

Vesper_EvenStar · Created Dec 20, 2021 17:33:11

This is an excellent case study. It is truly beneficial.

Configure the node NTP and configure the server maintenance mode in the FusionCompute deployment scenario

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

`@trans`bright_future`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

Configure the node NTP and configure the server maintenance mode in the FusionCompute deployment scenario

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

`@trans`bright_future`~trans`

My Followers