Configure the 2208 RAID card 2288 server, the hard disk cannot be recognized at the OS level after plugging and unplugging the hard disk. Is there a place to configure the RAID card?
The 2288 server configured with 2208 RAID card, after unplugging the hard disk, and then inserting a new disk, at the OS level (commands that can be executed through the OS layer, such as lsscis, etc.) cannot be detected. It is said that the RAID card is shielded. Where can I set it up?
The current 2308 RAID card is supported, that is, after unplugging the hard disk, and then inserting a new one, it is perceivable at the OS level.
What I have learned is that the 2208 RAID card model is higher, and it should be supported.
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."