Configure NDP and NTDP to collect EasyDeploy network topology

Latest reply: Apr 14, 2017 11:23:40 1769 1 0 0
Configure NDP and NTDP to collect EasyDeploy network topology
  • x
  • convention:

Created Apr 14, 2017 11:23:40 Helpful(0) Helpful(0)

"Configure topology collection on the S series switch, except S1700 as follows:
1. Configure topology collection on the Commander.
[HUAWEI] ndp enable
[HUAWEI] ntdp enable
[HUAWEI] ntdp timer 5 
[HUAWEI] easy-operation
[HUAWEI-easyoperation] topology enable
[HUAWEI-easyoperation] client auto-join enable
[HUAWEI-easyoperation] quit

2. Configure the cluster and cluster management VLAN.
[HUAWEI] cluster enable
[HUAWEI] cluster
[HUAWEI-cluster] mngvlanid 10 
By default, the management VLAN of a cluster is VLAN 1. It is recommended that you change the management VLAN using command.
The management VLAN must be the same as the VLAN on the Commander's interface connected to client."
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top