Hello!
About your question.
Step 1: Configure the protocol supported by the system mode.
Step 2: Configure a VDSL line profile.
Step 3: Add boards.
Step 4: Configure the VLAN and bind it to the upstream port.
Run the following commands to perform the fourth step:
[vlan-config]
<vlan-config>
vlan 100 smart
vlan 200 smart
port vlan 100 0/0 0
port vlan 100 0/0 1
port vlan 200 0/0 0
port vlan 200 0/0 1
#
If you have any other questions, please post them on the forum.
Thanks!