Got it

Configure DHCPv6 ONU WAN through CLI / OMCI

Created: Jan 27, 2021 13:33:54Latest reply: Jun 5, 2021 23:55:50 769 8 0 0 0
  Rewarded HiCoins: 0 (problem resolved)

Hi there,


We're trying to configure the WAN v6 of ONU's by the CLI of the OLT huawei, we know that, to configure the PPPoE from OMCI we use the following commands:


"ont ipconfig 0 1 ip-index 0 pppoe vlan 1000 user-account username USER_PPPOE password PASS_PPPOE

ont wan-config 0 1 ip-index 0 profile-id 1

ont internet-config 0 1 ip-index 0"


Searching in the hedex of the OLT's, we found  how to configure a DHCPv6 on the OLT itself to distribute the IPv6.

there's any possibility of sending the comand by OCMI to an ONU and configure the WAN of DHCPv6 without having the necessity of access by web


Featured Answers

Recommended answer

Gavin.Liu
Created Jan 28, 2021 02:57:05

Dear friend!

The command which you say doesn't support from OLT

You are advised to configure the ONU on the web page.

In the navigation tree on the left, choose Advanced > WAN. In the pane on the right, click New. In the dialog box that is displayed, set WAN Mode to Route WAN, as shown in the following figure, then Click Apply.


1


Thanks!

View more
  • x
  • convention:

All Answers
Hello,
Kindly wait a second, we are processing on your problem.
View more
  • x
  • convention:

Dear friend!
Are you going to share our knowledge?
Or is there a problem that you need our help?
View more
  • x
  • convention:

I need help to configure DHCPv6 on WAN of ONU through CLI/OMCI.

Can u help me ?
View more
  • x
  • convention:

liqiang185
liqiang185 Created Jan 27, 2021 15:11:24 (0) (0)
Please provide the product model of OLT and ONU, thank you!  
Posted by KevinWauters at 2021-01-27 14:18 I need help to configure DHCPv6 on WAN of ONU through CLI/OMCI.Can u help me ?
OLT's
MA5600T and MA5800-X7
Onu's
EG8145V5 and HG8245Q2
View more
  • x
  • convention:

Dear friend!

The command which you say doesn't support from OLT

You are advised to configure the ONU on the web page.

In the navigation tree on the left, choose Advanced > WAN. In the pane on the right, click New. In the dialog box that is displayed, set WAN Mode to Route WAN, as shown in the following figure, then Click Apply.


1


Thanks!

View more
  • x
  • convention:

was there any progress with this?
"there's any possibility of sending the comand by OCMI to an ONU and configure the WAN of DHCPv6 without having the necessity of access by web"

View more
  • x
  • convention:

Chenxintao
Chenxintao Created Jun 6, 2021 02:03:19 (0) (0)
Hi, friend!
You still need to configure DHCPv6 on the ONT WebUI.  

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.