Got it
Huawei Enterprise Support Community
Community Forums Routing & Switching
Configuration VLAN routin...

Configuration VLAN routing

Created: Nov 16, 2020 11:01:38Latest reply: Jul 23, 2021 06:23:14 525 5 2 0 0
  Rewarded HiCoins： 1 (problem resolved)
View the author 1#

Hii , i have to assign ip addres to AR1, AR2 and AR3 and configurate VLAN routing on AR1 Router  to make sure that different vlan can comunicated at layer 3, how i can do this ? 


topology configuration

thanks. 

Like (2) Dislike (0) Favorite(0) Share Report
Previous: S5735 switch iSCSI
Next: PC vlan 10 20 in eNSP
Featured Answers

Best answer

(2) (0)
hemin88
Moderator Author Created Nov 16, 2020 19:24:22

Hello:

Work on AR1:
- Both ports towards LSW4 & LSW5 should be in Trunk mode, allowing your desired VLANs
- Configuring VLANIF interfaces for all 100, 200, and 202 to be gateways for PC in its related access VLAN (VLANIF100: 192.168.100.254, VLANIF200: 192.168.200.254, VLANIF220: 192.168.220.254 )
- "Make sure the VLANIF IP address is in the same range of the PCs on that VLAN"


On LSW4 and LSW5:
- Trunk ports
"Please be aware of STP port elections, not to block the ports towards AR1"


On LSW1 LSW2 and LSW3
- Uplink ports towards LSW4 and LSW5 are to be in Trunk mode
- PCs to be connected to Access ports -----> allow the desired VLANs



On PCs:
- IP address and Gateways "VLANIF addresses"


View more
  • x
  • convention：

Recommended answer

(2) (0)
Popeye_Wang
Admin Created Nov 16, 2020 11:12:47

HI,
On the AR1, you can configure the two interfaces that connected the Switches to be the layer-2 interface, configured the IPs of  VLANIF 100 200 220 as the gateways. Then set the two interfaces to the trunk port and allow these VLANs to pass.

View more
  • x
  • convention：
All Answers
(0) (0)
2#
Popeye_Wang
Popeye_Wang Admin Created Nov 16, 2020 11:03:07

Hello,

Please kindly wait for a minute.

Our engineer is dealing with your question.
View more
  • x
  • convention：
(2) (0)
3#
Popeye_Wang
Popeye_Wang Admin Created Nov 16, 2020 11:12:47

HI,
On the AR1, you can configure the two interfaces that connected the Switches to be the layer-2 interface, configured the IPs of  VLANIF 100 200 220 as the gateways. Then set the two interfaces to the trunk port and allow these VLANs to pass.

View more
  • x
  • convention：
(2) (0)
4#
hemin88
hemin88 Moderator Author Created Nov 16, 2020 19:24:22

Hello:

Work on AR1:
- Both ports towards LSW4 & LSW5 should be in Trunk mode, allowing your desired VLANs
- Configuring VLANIF interfaces for all 100, 200, and 202 to be gateways for PC in its related access VLAN (VLANIF100: 192.168.100.254, VLANIF200: 192.168.200.254, VLANIF220: 192.168.220.254 )
- "Make sure the VLANIF IP address is in the same range of the PCs on that VLAN"


On LSW4 and LSW5:
- Trunk ports
"Please be aware of STP port elections, not to block the ports towards AR1"


On LSW1 LSW2 and LSW3
- Uplink ports towards LSW4 and LSW5 are to be in Trunk mode
- PCs to be connected to Access ports -----> allow the desired VLANs



On PCs:
- IP address and Gateways "VLANIF addresses"


View more
  • x
  • convention：
(0) (0)
5#
lucads02
lucads02 Created Nov 21, 2020 08:22:40

Posted by hemin88 at 2020-11-16 19:24 Hello:Work on AR1:- Both ports towards LSW4 & LSW5 should be in Trunk mode, allowing your desired VL ...
@hemin88 thank you
and if I would like to submit vlan100 to nat on ar1, I just need to define an address-group , an acl and apply the nat to all interfaces of the router ?
I’m really grateful for your help.
View more
  • x
  • convention：
(0) (0)
6#
Unicef
Unicef MVE Created Jul 23, 2021 06:23:14

WELL DONE ANSWER
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.