1. On the EV750 web page, choose Settings > Wireless&networks > LAN settings > Rounter
2. On theRouter Setting page, set the LAN interface IP address of the EV750
3. Log into the eOMCoperation and maintenance client, and select the eCNSon the NE Config In Batch tab page
4. Run theMOD APNcommand with Route behind MS flag set to enable(enable).
!! You can query APN nameby running the LST APN command on the eCNS.
5. Run the ADD HRTBEHINDMS command to add a Routing Behind MS route
· IMSI: IMSI of the EV750
· Access point name: the APN name of the core network, which can be queried by running the LST APN command
· Section address: the IP address or subnet segment address of the device connected to the EV750. If the actually planned IP address or subnet segment of the connected device resides in a different network segment from the LAN port of the EV750, change the LAN port address of the EV750 to ensure that it resides in the same network segment as the planned IP address or subnet segment of the connected device.
·Section mask: the subnet mask of the IP address or subnet segment address of a device connected to the EV750.
6. Restart the EV750
