Configuration / Modified WAN on ONT GPON Huawei by Telnet from OLT
- x
- convention：
- Emotion(0)
|
Dear reyokh！ Your purpose is achievable. Step 1: Enable the telnet function of the ONT. Step 2: Use the command to remotely log in to the Web page of the ONT telnet ont frame/slot/port ontid [ ont-vlan | ont-ip ] Step 3: Configure or modify Wan port In the navigation tree on the left, choose WAN > WAN Configuration. In the pane on the right, click New. In the dialog box that is displayed, set Mode to Route WAN, as shown in the following Figure.
Then click Apply！ Good luck，Thank you！ |
liqiang185
Reply reyokh Created Feb 3, 2020 02:48:14
(0)
(0)
Please enable the telnet function of the ONT at first.
reyokh
Reply liqiang185 Created Feb 3, 2020 02:54:08
(0)
(0)
yes liqiang, i already enable telent function and has been telent to the ONT, but i cannot find command for configure/modify WAN. |
|
Dear reyokh！ Your purpose is achievable. Step 1: Enable the telnet function of the ONT. Step 2: Use the command to remotely log in to the Web page of the ONT telnet ont frame/slot/port ontid [ ont-vlan | ont-ip ] Step 3: Configure or modify Wan port In the navigation tree on the left, choose WAN > WAN Configuration. In the pane on the right, click New. In the dialog box that is displayed, set Mode to Route WAN, as shown in the following Figure.
Then click Apply！ Good luck，Thank you！ |
liqiang185
Reply reyokh Created Feb 3, 2020 02:48:14
(0)
(0)
Please enable the telnet function of the ONT at first.
reyokh
Reply liqiang185 Created Feb 3, 2020 02:54:08
(0)
(0)
yes liqiang, i already enable telent function and has been telent to the ONT, but i cannot find command for configure/modify WAN. |
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
