Hello all: Somebody have examples of the mode configuration GPON.
Bind a T-CONT to a DBA profile.
In line profile mode:
This method is applicable to the scenario where the DBA profile is stable and the terminals are of a single type.
Run the tcont command to bind the T-CONT to a DBA profile. Ensure that Configuring a DBA Profile is completed before the configuration.
In GPON mode:
This method is applicable to the scenario where the DBA profile changes frequently and the terminals are of different types.
Use the following two methods to bind a DBA profile. Select either method as required. Both methods can coexist in the system.
Run the ont-lineprofile gpon command to add a GPON ONT line profile and enter the GPON ONT line profile mode.
Regardless of whether the ONT is in the OMCI or SNMP management mode, the line profile must be configured for the ONT. After adding a GPON ONT line profile, directly enter the GPON ONT line profile mode to configure the related attributes of the ONT line.
