Got it

Huawei Enterprise Support Community

Community Forums Wireless & Microwave

Configuration Introduction of eA680 LTE CPE

Created: Dec 19, 2018 02:18:42Latest reply: Dec 19, 2021 16:47:04 1373 3 1 0 0

View the author ^1#

This chapter describes the configuration Introduction of the eA680.

Prerequisites

1. The deployment on the network side is complete.
2. The computer has been connected to the eA680-208.
3. The installation of the eA680-208 is complete.
4. The eA680-208 starts correctly based on default parameters during power-on.

Procedure

1. Start the IE browser, enter https://192.168.1.1 in the address bar, and press Enter. Connectthe eA680-208 from the near end using the Web management page. NOTE: Use Internet Explorer 9.0 or a later version.

2. Log in to the web management page with User name set to default value admin and Password set to default value admin.

3. Access Password Modification and modify New Password.

-End

You are welcomed to visit our “Enterprise Wireless Information Center” for further document.
http://support.huawei.com/onlinetoolsweb/elte/Info_en.jsp

This post was last edited by Mr.Bright at 2019-01-11 03:28.

x
convention：
Emotion(0)

Like (1) Dislike (0) Favorite(0) Report

 Previous: Maintenance of eA680 LTE CPE

Next: ESN Verification Failed on eAPP



(0) (0)

^2#

MR.HTC Created Dec 25, 2018 10:14:36

Thanks you

x
convention：

(0) (0)

^3#

Mysterious.color

Created Dec 30, 2018 06:51:43

useful information

x
convention：

(0) (0)

^4#

Zemo_Mccracken

Moderator Created Dec 19, 2021 16:47:04

Great post. Thank you for sharing

x
convention：

Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.

Enterprise

Consumer

Corporate

Carriers

Configuration Introduction of eA680 LTE CPE

This chapter describes the configuration Introduction of the eA680.

Prerequisites

Procedure

1. Start the IE browser, enter https://192.168.1.1 in the address bar, and press Enter. Connectthe eA680-208 from the near end using the Web management page. NOTE: Use Internet Explorer 9.0 or a later version.

2. Log in to the web management page with User name set to default value admin and Password set to default value admin.

3. Access Password Modification and modify New Password.

-End

You are welcomed to visit our “Enterprise Wireless Information Center” for further document.http://support.huawei.com/onlinetoolsweb/elte/Info_en.jsp

Third Party’s Trade Secret

My Followers

You are welcomed to visit our “Enterprise Wireless Information Center” for further document.
http://support.huawei.com/onlinetoolsweb/elte/Info_en.jsp