Hello,
I've this configuration on Huawei NE-40E and would like to put this config into Huawei Secospace USG6000 but failed.
mode user-termination
#
interface Eth-Trunk10.2
control-vid 2 qinq-termination
vlan-group 1
statistic enable
user-queue cir 25600 pir 25600 inbound
user-queue cir 25600 pir 25600 outbound
#
qinq termination pe-vid 2053 ce-vid 2 vlan-group 1
ip address 1.1.1.1 255.255.255.252
arp broadcast enable