# Configure association between VRRP and NQA to implement an active/standby switchover.
<HUAWEI> system-view [HUAWEI] interface vlanif 10 [HUAWEI-Vlanif10] ip address 10.1.1.1 24 [HUAWEI-Vlanif10] vrrp vrid 1 virtual-ip 10.1.1.3 [HUAWEI-Vlanif10] quit [HUAWEI] nqa test-instance user test [HUAWEI-nqa-user-test] test-type icmp [HUAWEI-nqa-user-test] destination-address ipv4 10.20.1.2 [HUAWEI-nqa-user-test] frequency 15 [HUAWEI-nqa-user-test] start now [HUAWEI-nqa-user-test] quit [HUAWEI] interface vlanif 10 [HUAWEI-Vlanif10] vrrp vrid 1 track nqa user test reduced 40 [HUAWEI-Vlanif10] quit
More Information: S Series Switches Common Operation Guide