You can use the following methods to locate hardware faults:
1.Check whether a device can be powered on properly.
2. Check whether the hardware indicator is normal.
3. Check whether the PTZ has holding torque.
4. Check whether the PTZ rotates properly.
5. Check whether the network cable or optical fiber of the IPC is connected properly.
6. Check whether the network port or optical port of the IPC is normal.
Common Methods for Locating Hardware Faults
Created: Dec 28, 2018 06:33:56Latest reply: Dec 31, 2018 03:11:44
933
1
11
0
0
- x
- convention：
- Emotion(0)
|
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
