Common MAC Address Operations : Displaying the MAC Address of an Interface

Latest reply: May 6, 2016 02:57:05 894 1 0 0

Run the display interface gigabitethernet1/0/1 command. In the command output, 00e0-f74b-6d00 refers to the interface's MAC address. The MAC address of a Layer 2 interface and the device's MAC address are the same.

<HUAWEI> display interface gigabitethernet1/0/1
GigabitEthernet1/0/1  current state : UP                                        
Line protocol current state : UP                                                
Description:                                                                    
Switch Port, Link-type : access(configured),                                    
PVID :  103, TPID : 8100(Hex), The Maximum Frame Length is 9216                 
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-f74b-6d00
......
 
 
 
  • x
  • convention:

user_1763575
Created May 6, 2016 02:57:05 Helpful(0) Helpful(0)

Thank you.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login