Configuring a Temporary Port Group
# Run the port-group group-member command to add GE1/0/9 to GE1/0/15 to a temporary port group.
<HUAWEI> system-view [HUAWEI] port-group group-member gigabitethernet 1/0/9 to gigabitethernet 1/0/15 [HUAWEI-port-group]
# Run the interface range command to add GE1/0/16 to GE1/0/20 to a temporary port group. (The interface range command is supported by only V200R003C00 and later versions.)
<HUAWEI> system-view [HUAWEI] interface range gigabitethernet 1/0/16 to gigabitethernet 1/0/20 [HUAWEI-port-group]
More Information: S Series Switches Common Operation Guide