Hello, everyone! I have summarized some common commands for adding ONT service configurations.
Configuring a DBA Profile
1. Configuring DBA for the Voice Service
2. Configuring DBA for the Internet Access Service
3. Configuring DBA for Video Services
Configuring an ONT Line Profile
1. Binding a T-CONT to a DBA Profile
2. Add a GEM port and map it to the corresponding T-CONT
Configure the mapping between the GEM port and the service VLAN
Configuring an ONT Service Profile
These are the commands that I have learned recently. If any problem occurs during the configuration of the service profile, you can run these commands to check the service configuration process.These commands cannot replace each other during the configuration, because they are configured with different contents.
I hope it will help you. Thank you!
