Common ARP Operations : Setting the Aging Time of ARP Entries

Latest reply: Jun 29, 2016 13:51:25 1795 1 0 0

The ARP aging time takes effect only for dynamic ARP entries. The default ARP aging time is 20 minutes. You can run the arp expire-time expire-time command in the system view or interface view to configure the aging time of dynamic ARP entries. The value range of expire-time is as follows: 60-62640 (chassis switches) and 30-62640 (box switches), in seconds.

If you run the command only in the system view, the aging time takes effect for dynamic ARP entries learned by all interfaces on the device. If you run the command both in the view of an interface and the system view, the aging time configured in the interface view takes effect for the dynamic ARP entries learned by the interface.

# Set the aging time of dynamic ARP entries to 1800s.

<HUAWEI> system-view
[HUAWEI] vlan batch 100
[HUAWEI] interface vlanif 100
[HUAWEI-Vlanif100] arp expire-time 1800

# After the configuration is complete, you can run the display current configuration | include arp command in any view to check the configured aging time of dynamic ARP entries.

<HUAWEI> display current-configuration | include arp
arp expire-time 1800
 

  • x
  • convention:

Created Jun 29, 2016 13:51:25 Helpful(0) Helpful(0)

Thank you.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top