Hello, everyone. Today, I will share with you the commissioning procedure of the SUN2000 household inverter (iPhone), as shown in the following figure.
Steps
1) Register an installer account on https://intl.fusionsolar.huawei.com or request one from your installer.
2) Download FusionSolar APP on your phone from the AppStore
3)Go to phone settings > Mobile Data > Turn it OFF
4)Go to Wi-Fi settings and connect to the SUN2000 Wi-Fi with the password: Changeme
5) Open FusionSolar app > 3 dots > Device Commissioning > Device and tap on the inverter image
6) Log in as an installer with password 00000a go to Quick Settings, Set the grid code to your country, enable Sync Phone time and add optional devices (if are installed).
7) Set the domain name to intl.fusionsolar.huawei.com, select your home Wi-Fi, fill in the password for it then press Next then Finish and close the app.
8) Go to phone settings > Mobile Data > Enable Mobile Data then go to Wi-Fi Settings and turn OFF the Wi-Fi
9) Open FusionSolar APP, log in with your account, and select Setup Wizard
10) In Setup Wizard scan or manually enter the SN of the inverter then click on Add plant.
(if it's the second inverter in an existing plant, select "Connect to an existing plant")
11) Fill in the plant details, press Next then Finish
