Got it

Commands for work with ONTs (4)

Latest reply: Jul 29, 2021 15:21:24 912 53 23 0 0

Hello, everyone!


I am continuing the article about commands for work with ONTs.



1. Command for display brief statistics of the ONT:


TEST(config)#display statistics ont 0/1 0 0

{ <cr>||<K> }:


Command:

display statistics ont 0/1 0 0

----------------------------------------------------------------

Upstream frames             : 1636113

Upstream bytes              : 496147532

Upstream discarded frames   : 0

Downstream frames           : 4828528

Downstream bytes            : 4974443775

Downstream discarded frames : 221376

----------------------------------------------------------------


With this command, we can see a number of received frames and discarded frames for downstream and upstream.



2. Command for display brief statistics of the ONT port ethernet


Now, we can see detailed statistics of the ONT for ethernet port 1:


TEST(config)#display statistics ont-eth 0/1 0 0 ont-port 1

{ <cr>||<K> }:


Command:

display statistics ont-eth 0/1 0 0 ont-port 1

-----------------------------------------------------------------------

Received frames                     :               187836 100%

Received unicast frames             :               187777  99%

Received multicast frames           :                   59   0%

Received broadcast frames           :                    0   0%


Received 64-byte frames             :                 7874   4%

Received 65~127-byte frames         :               135928  72%

Received 128~255-byte frames        :                 6979   3%

Received 256~511-byte frames        :                 3449   1%

Received 512~1023-byte frames       :                 7288   3%

Received 1024~1518-byte frames      :                26318  14%

Received over 1518-byte frames      :                    0   0%

Received undersize discarded frames :                    0   0%

Received oversize discarded frames  :                    0   0%

Received fragments                  :                    0   0%

Received jabbers                    :                    0

Received FCS error frames           :                    0

Discard frames due to errors        :                    0

Received alignment error frames     :                    0

MAC sub-layer received error frames :                    0

PPPOE filtered frames               :                    0

Buffer overflows on receive         :                    0

Received PAUSE frames               :                    0

Received right bytes                :             51619952

Received bad bytes                  :                    0


Sent frames                         :               607315 100%

Sent unicast frames                 :               596756  98%

Sent multicast frames               :                  655   0%

Sent broadcast frames               :                 9904   1%


Sent delay frames                   :                    0

Sent MTU exceeded discard frames    :                    0

Carrier sense error frames          :                    0

SQE test error messages             :                    0

Sent single collision frames        :                    0

Sent multiple collision frames      :                    0

Sent excessive collision frames     :                    0

Late collision frames               :                    0

MAC sub-layer sent error frames     :                    0

Buffer overflows on transmit        :                    0

Sent PAUSE frames                   :                    0

Sent right bytes                    :            758730671

Sent bad bytes                      :                    0


State changed times                 :                    -

Statistic duration    : 0 day(s), 5 hour(s), 29 minute(s), 15 second(s)

-----------------------------------------------------------------------



3. Commands for display the ONT port status


Next two commands we use to display ONT port status – all ethernet ports and ethernet port 1:


TEST(config-if-gpon-0/1)#display ont port state 0 0 eth-port all

{ <cr>|detail<K>||<K> }:


Command:

display ont port state 0 0 eth-port all

--------------------------------------------------------------------------

ONT-ID   ONT      ONT       Speed(Mbps)   Duplex   LinkState  RingStatus

port-ID  Port-type

--------------------------------------------------------------------------

0         1         GE 100           full     up         -

0         2         GE 100           full     up         -

0         3         GE -             -        down       -

0         4         GE 100           full     up         -

--------------------------------------------------------------------------


TEST(config-if-gpon-0/1)#display ont port state 0 0 eth-port 1

{ <cr>|detail<K>||<K> }:


Command:

display ont port state 0 0 eth-port 1

--------------------------------------------------------------------------

ONT-ID   ONT      ONT       Speed(Mbps)   Duplex   LinkState  RingStatus

port-ID  Port-type

--------------------------------------------------------------------------

0         1         GE 100           full     up         -

--------------------------------------------------------------------------



4. Command for display ONT registration information:


TEST(config-if-gpon-0/1)#display ont register-info 0 0

{ <cr>||<K> }:


Command:

display ont register-info 0 0

------------------------------------------------------------------------------

Index               : 10

Auth-type           : SN-auth

SN                  : XXXXXXXXXX082B1F (HWTC-6B0XXXXX)

TYPE                : 247

UpTime              : 2021-06-23 09:31+02:00 DST

DownTime            : -

DownCause           : -

------------------------------------------------------------------------------

Index               : 9

Auth-type           : SN-auth

SN                  : XXXXXXXXXX082B1F (HWTC-6B0XXXXX)

TYPE                : 247

UpTime              : 2021-06-23 09:31+02:00 DST

DownTime            : 2021-06-23 09:31+02:00 DST

DownCause           : ONT LOSi/LOBi alarm

------------------------------------------------------------------------------

Index               : 8

Auth-type           : SN-auth

SN                  : XXXXXXXXXX082B1F (HWTC-6B0XXXXX)

TYPE                : 247

UpTime              : 2021-06-23 09:31+02:00 DST

DownTime            : 2021-06-23 09:31+02:00 DST

DownCause           : ONT LOSi/LOBi alarm

------------------------------------------------------------------------------

...

------------------------------------------------------------------------------

Total :  10




Thank you!


Excellent
View more
  • x
  • convention:

Vlada85
Vlada85 Created Jun 27, 2021 17:34:47 (0) (0)
Thank you  
Nice post
View more
  • x
  • convention:

Vlada85
Vlada85 Created Jun 27, 2021 17:34:57 (0) (0)
Thank you  
good.
View more
  • x
  • convention:

Vlada85
Vlada85 Created Jun 27, 2021 17:35:05 (0) (0)
Thank you  
Interesting. Thanks
View more
  • x
  • convention:

Vlada85
Vlada85 Created Jun 27, 2021 17:36:11 (0) (0)
Thank you  
Thank you
View more
  • x
  • convention:

Good share
View more
  • x
  • convention:

ulrichwandja
ulrichwandja Created Jun 28, 2021 18:07:49 (0) (0)
 
Thank you for sharing!
View more
  • x
  • convention:

Vlada85
Vlada85 Created Jul 10, 2021 05:57:27 (0) (0)
Welcome  
Good post. Commands for work with ONTs  (4)-4005895-1
View more
  • x
  • convention:

Vlada85
Vlada85 Created Jul 10, 2021 05:57:06 (0) (0)
Thank you  
Thanks for sharing
View more
  • x
  • convention:

Good share
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.