Command to find out the path a route is taking

MRYang · Created Mar 13, 2018 05:56:38

There are many parameters, is it enough for you?

<HUAWEI>disp ip routing-table 192.168.108.147 32 ver
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Table : Public
Summary Count : 1

Destination: 192.168.108.147/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Neighbour: 0.0.0.0
State: Active NoAdv Age: 17d02h13m52s
Tag: 0 Priority: high
Label: NULL QoSInfo: 0x0
IndirectID: 0x0
RelayNextHop: 0.0.0.0 Interface: GigabitEthernet0/0/0
TunnelID: 0x0 Flags: D

oyshuo · Created Mar 8, 2018 03:55:58

I am not get the command too.

user_2844477 · Created Mar 9, 2018 02:45:30

Any Huawei engineer could help?

MRYang · Created Mar 13, 2018 05:56:38

There are many parameters, is it enough for you?

<HUAWEI>disp ip routing-table 192.168.108.147 32 ver
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Table : Public
Summary Count : 1

Destination: 192.168.108.147/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Neighbour: 0.0.0.0
State: Active NoAdv Age: 17d02h13m52s
Tag: 0 Priority: high
Label: NULL QoSInfo: 0x0
IndirectID: 0x0
RelayNextHop: 0.0.0.0 Interface: GigabitEthernet0/0/0
TunnelID: 0x0 Flags: D

user_2844477 · Created Mar 14, 2018 21:32:41

Posted by MRYang at 2018-03-13 05:56 There are many parameters, is it enough for you?<HUAWEI>disp ip routing-table 192.168.108.147 32 ver ...

Hi.

It's not the command I need. The command you suggest just tells the path to certain destination.
If there are multiple paths, it would be great if we could know the exact path a packet would take from a SOURCE -> DESTINATION IP, like Cisco:

We know that for source IP 192.168.10.5 and destination IP 131.0.22.0, packet will go through VLAN10.
show ip cef exact-route 192.168.10.5 131.0.22.0
192.168.10.5 -> 131.0.22.0 =>IP adj out of Vlan10, addr 192.168.10.10

oyshuo · Created Mar 16, 2018 02:45:10

how do you try the command
display fib

to check the IP address nexthop

user_2844477 · Created Aug 18, 2019 19:50:16

Hi Sophoni.

Any Huawei employee could help on this? If this feature is not available yet, could you consider adding it to the next VRP releases?

This information is very helpful if we have many paths to get from A to B and we need to know the exact path the switch calculated for a specific destination to troubleshoot some problem.

Like Cisco, IP CEF gives us the detailed information about how A gets to B:
show ip cef exact-route 192.168.10.5 131.0.22.0
192.168.10.5 -> 131.0.22.0 =>IP adj out of Vlan10, addr 192.168.10.10

Using the command above, one could know which path a packet from source IP 192.168.10.5 will take to destination IP 131.0.22.0.

Thanks.

user_2844477 · Created Apr 16, 2020 00:30:44

Hi all.

I'm still looking for this command. Anyone knows if there is any hidden command to achieve this?

What I need to know is a commando that can provide me the hash result and shows me which port on switch a specific flow is taking, like cisco does using

show ip cef exact-route 192.168.10.5 131.0.22.0
192.168.10.5 -> 131.0.22.0 =>IP adj out of Vlan10, addr 192.168.10.10

Thanks.

lucian2003 · Created Apr 16, 2020 00:44:55

Posted by MRYang at 2018-03-12 16:56 There are many parameters, is it enough for you?<HUAWEI>disp ip routing-table 192.168.108.147 32 ver ...

Thanks

Command to find out the path a route is taking

Best answer

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

Command to find out the path a route is taking

Best answer

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers