Command not recognized.

wissal · Created Apr 21, 2021 17:24:52

Hello,

anti-rogueont manual-detect

Function

This command is used to manually check and isolate rogue ONTs. In normal conditions, ONTs transmit optical signals according to the time stamp allocated by the OLT. If an ONT that is not allocated a time stamp transmits optical signals, the optical signals will conflict with the optical signals transmitted by other ONTs. As a result, the normal communication of other ONTs is affected. Such an ONT that does not transmit optical signals according to the allocated time stamp is called a rogue ONT.

Format

anti-rogueont manual-detect portid

Parameters

Parameter	Description	Value
portid	Indicates the ID of a PON port.	Please see Differences Between Shelves.

Modes

GPON mode, EPON mode

Level

Operator level

Usage Guidelines

Run the config command to enter global config mode, and then run the interface gpon command to enter GPON mode, or run the interface epon command to enter EPON mode.
You can run the xpon anti-rogueont autodetect command or the anti-rogueont autodetect command to automatically check and isolate rogue ONTs in the system.
After this command is executed successfully, you can run the display port state(gpon) or display port state(epon) command to query the result.

Example

To manually check and isolate rogue ONTs connected to GPON port 0/3/0, do as follows:

huawei(config-if-gpon-0/3)#anti-rogueont manual-detect{ portid<U><0,3> }:0

                                                                                

  Command:                                                                      

          anti-rogueont manual-detect 0

This operation will interrupt the services of the ONT(s) connnected to this port


Are you sure to continue? (y/n)[n]: y

System Response

The system displays the message "This operation will interrupt the services of the ONT(s) connected to this port" and "Are you sure to continue? (y/n)[n]" after this command is executed successfully. Enter y to confirm the checking and isolatation of rogue ONTs.
For more information about the error message that the system displays against a command entered with incorrect syntax, see the "Syntax Check" in Parameter.

Detail

https://support.huawei.com/hedex/hdx.do?lib=EDOC100012265431189481&docid=EDOC1000122654&lang=en&v=07&tocLib=EDOC100012265431189481&tocV=07&id=GUID4075697A-5FCA-4B7C-9821-80685A4ADBB4_2&tocURL=resources%252Fcmd%252Fanti-rogueont_manual-detect.html&p=t&fe=1&ui=3&keyword=anti-rogueont%2Bmanual-detect

Thanks

ariase88 · Created Apr 21, 2021 16:37:27

Thanks for contacting the Huawei community!

We are checking your question and will provide an answer to you shortly...

wissal · Created Apr 21, 2021 17:24:52

Hello,

anti-rogueont manual-detect

Function

This command is used to manually check and isolate rogue ONTs. In normal conditions, ONTs transmit optical signals according to the time stamp allocated by the OLT. If an ONT that is not allocated a time stamp transmits optical signals, the optical signals will conflict with the optical signals transmitted by other ONTs. As a result, the normal communication of other ONTs is affected. Such an ONT that does not transmit optical signals according to the allocated time stamp is called a rogue ONT.

Format

anti-rogueont manual-detect portid

Parameters

Parameter	Description	Value
portid	Indicates the ID of a PON port.	Please see Differences Between Shelves.

Modes

GPON mode, EPON mode

Level

Operator level

Usage Guidelines

Run the config command to enter global config mode, and then run the interface gpon command to enter GPON mode, or run the interface epon command to enter EPON mode.
You can run the xpon anti-rogueont autodetect command or the anti-rogueont autodetect command to automatically check and isolate rogue ONTs in the system.
After this command is executed successfully, you can run the display port state(gpon) or display port state(epon) command to query the result.

Example

To manually check and isolate rogue ONTs connected to GPON port 0/3/0, do as follows:

huawei(config-if-gpon-0/3)#anti-rogueont manual-detect{ portid<U><0,3> }:0

                                                                                

  Command:                                                                      

          anti-rogueont manual-detect 0

This operation will interrupt the services of the ONT(s) connnected to this port


Are you sure to continue? (y/n)[n]: y

System Response

The system displays the message "This operation will interrupt the services of the ONT(s) connected to this port" and "Are you sure to continue? (y/n)[n]" after this command is executed successfully. Enter y to confirm the checking and isolatation of rogue ONTs.
For more information about the error message that the system displays against a command entered with incorrect syntax, see the "Syntax Check" in Parameter.

Detail

https://support.huawei.com/hedex/hdx.do?lib=EDOC100012265431189481&docid=EDOC1000122654&lang=en&v=07&tocLib=EDOC100012265431189481&tocV=07&id=GUID4075697A-5FCA-4B7C-9821-80685A4ADBB4_2&tocURL=resources%252Fcmd%252Fanti-rogueont_manual-detect.html&p=t&fe=1&ui=3&keyword=anti-rogueont%2Bmanual-detect

Thanks

Command not recognized.

Best answer

anti-rogueont manual-detect

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

anti-rogueont manual-detect

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Command not recognized.

Best answer

anti-rogueont manual-detect

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

anti-rogueont manual-detect

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

Third Party’s Trade Secret

My Followers