CloudEngine vs SX7 series switch difference

n84014315 · Created May 18, 2018 06:34:07

Commands on traditional Ethernet switches take effect immediately, while command lines on CE series switches take effect immediately or in two phases.

l Immediate mode: After a user runs a command and presses Enter, the system checks whether the current configuration is different from the previous configuration. If they are different, the system commits the current configuration and generates the configuration rollback point. As a result, multiple configuration rollback points may be generated when one feature is deployed.

To make a command take effect immediately, run the following command in the user view:

<HUAWEI> system-view immediately

Enter system view, return user view with return command.

[HUAWEI]

l In two-stage mode, after a user runs a series of commands, the system checks the differences between the current and previous configurations and generates a configuration rollback point only when the user runs the commit command. This allows the configurations of multiple commands for a service to take effect in batches.
To make a command take effect in two-stage mode, run the following command in the user view:

<HUAWEI> system-view

Enter system view, return user view with return command.

[~HUAWEI]

Tina.4648 · Created May 18, 2018 08:05:36

You must run the commit command to commit the configuration in the second stage. The new configuration then takes effect in the current system.
http://support.huawei.com/hedex/pages/EDOC100016868031189843/04/EDOC100016868031189843/04/resources/dc/commit.html?ft=0&fe=10&hib=12.1.3.1.7&id=commit&text=commit&docid=EDOC1000168680

DiegoXD · Created May 24, 2018 15:29:48

:)

Enterprise

Consumer

Corporate

Carriers

CloudEngine vs SX7 series switch difference

Third Party’s Trade Secret