Hello everyone!
I would like to compare the command line between Cisco and Huawei devices to help all of you to learn as your requirements.
| Cisco | Huawei |
|---|---|
| EXEC mode | user view |
| traceroute | tracert |
| terminal length 0 | screen-length 0 temporary |
| show | display |
| show version | display version |
| show history-command | display history-command |
| show interfaces | display interface |
| show ip interface | display ip interface |
| show ip route | display ip routing-table |
| show ip bgp | display bgp routing-table |
| show clock | display clock |
| show flash | dir flash: |
| show logging | display logbuffer |
| show snmp | display snmp-agent statistics |
| show users | display users |
| show tech-support | display diagnostic-information |
| write terminal, show running-config | display current-configuration |
| more nvram:startup-config, show startup-config | display saved-configuration |
| write erase | reset saved-configuration |
| write memory, copy running-config startup-config | save |
| clear | reset |
| clear counters | reset counters interface |
| clear interface | reset counters interface |
| clear access-list counters | reset acl counter all |
| no | undo |
| debug / no debug | debugging / undo debugging |
| reload | reboot |
| enable | super |
| disable | super 0 |
| erase | delete |
| exit | quit |
| configure terminal | system-view |
| configuration mode | system view |
| end | return |
| snmp-server | snmp-agent |
| hostname | sysname |
| router bgp | bgp |
| router ospf | ospf |
| router rip | rip |
| shutdown / no shutdown | shutdown / undo shutdown |
Please if you find this post useful click on helpful to encourage me to post more.
Happy learning!
