Got it

Cisco huawei LAC-LNS

Created: Oct 15, 2021 07:07:00Latest reply: Oct 15, 2021 13:47:28 374 6 0 0 0
  Rewarded HiCoins: 5 (problem resolved)

interoperability between cisco LAC SSG and Huawei LNS group ?

for Ne40e router


in lns group , 

Can we load load balance between one lac ssg  and 4 L2TP tunnel in huawei

is there loopback address limit?

To collect all tunnels in one lns group is ok ?



Featured Answers

Best answer

Recommended answer

fuzi_yao
Admin Created Oct 15, 2021 07:25:24



Can we load load balance between one lac ssg and 4 L2TP tunnel in huawei
// L2TP load balancing can be configured based on two L2TP tunnels.
is there loopback address limit?
// For L2TP LNS user forwarding, soft loopback can be used only when the outbound interface is configured with a TM. Otherwise, hard loopback can be configured using the forward-mode {through | loopback} l2tp command.
To collect all tunnels in one lns group is ok ?
// An LNS group can support multiple tunnels.
For details, see the configuration method in the link
https://support.huawei.com/hedex/hdx.do?docid=EDOC1100196170&id=EN-US_TASK_0172374291&lang=en


View more
  • x
  • convention:

All Answers
Hello,
We're working on your problem. Please be patient.
View more
  • x
  • convention:



Can we load load balance between one lac ssg and 4 L2TP tunnel in huawei
// L2TP load balancing can be configured based on two L2TP tunnels.
is there loopback address limit?
// For L2TP LNS user forwarding, soft loopback can be used only when the outbound interface is configured with a TM. Otherwise, hard loopback can be configured using the forward-mode {through | loopback} l2tp command.
To collect all tunnels in one lns group is ok ?
// An LNS group can support multiple tunnels.
For details, see the configuration method in the link
https://support.huawei.com/hedex/hdx.do?docid=EDOC1100196170&id=EN-US_TASK_0172374291&lang=en


View more
  • x
  • convention:

bro, In addition, these responses are based on the responses provided by Huawei devices. Cisco devices cannot confirm whether these features are supported.
View more
  • x
  • convention:

fargat
fargat Created Oct 15, 2021 08:28:35 (0) (0)
For first question, do you have any suggestion? To use more than one Lns-group is solution?  
fuzi_yao
fuzi_yao Reply fargat  Created Oct 15, 2021 08:58:40 (0) (0)
bro,Huawei can implement load balancing among multiple tunnels. You can select load balancing or primary/backup tunnels based on actual service requirements.  
Good answers
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.