Check whether the protection switching test is successful

Chenxintao · Created Jun 18, 2020 01:32:31

Hello, friend!

You can check whether the ODU_SNCP_PS alarm (ODUk SNCP protection switching alarm) is reported on the NMS.

You can also query the current status of the ODUk SNCP protection group on the NMS to check whether the switching is successful.

Thanks!

wissal · Created Jun 18, 2020 04:37:50

Hello,

Performing ODUk SNCP Protection Switching

This section describes how to perform ODUk SNCP protection switching during maintenance to lock the service onto the specified path.

Prerequisites

You are an NMS user with "Operator Group" privilege or higher.

The ODUk SNCP protection route must be configured.

Procedure

In the NE Explorer, select the NE and choose Configuration > WDM Service Management from the Function Tree.

NOTE:
If the Web LCT is used, the navigation path is as follows: Configuration > Subwavelength SNCP Service.
On the SNCP Service Control tab page, click Query in the right pane to query the ODUk SNCP protection.
Select the desired protection group, and click Function. Perform the desired operation in the displayed menu to perform protection switching.

NOTE:
When Revertive Mode is Revertive, Force to Working and Manual to Working are not available.

Thanks

Chenxintao · Created Jun 18, 2020 01:32:31

Hello, friend!

You can check whether the ODU_SNCP_PS alarm (ODUk SNCP protection switching alarm) is reported on the NMS.

You can also query the current status of the ODUk SNCP protection group on the NMS to check whether the switching is successful.

Thanks!

wissal · Created Jun 18, 2020 04:37:50

Hello,

Performing ODUk SNCP Protection Switching

This section describes how to perform ODUk SNCP protection switching during maintenance to lock the service onto the specified path.

Prerequisites

You are an NMS user with "Operator Group" privilege or higher.

The ODUk SNCP protection route must be configured.

Procedure

In the NE Explorer, select the NE and choose Configuration > WDM Service Management from the Function Tree.

NOTE:
If the Web LCT is used, the navigation path is as follows: Configuration > Subwavelength SNCP Service.
On the SNCP Service Control tab page, click Query in the right pane to query the ODUk SNCP protection.
Select the desired protection group, and click Function. Perform the desired operation in the displayed menu to perform protection switching.

NOTE:
When Revertive Mode is Revertive, Force to Working and Manual to Working are not available.

Thanks

Check whether the protection switching test is successful

Best answer

Recommended answer

Performing ODUk SNCP Protection Switching

Prerequisites

Procedure

Performing ODUk SNCP Protection Switching

Prerequisites

Procedure

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Check whether the protection switching test is successful

Best answer

Recommended answer

Performing ODUk SNCP Protection Switching

Prerequisites

Procedure

Performing ODUk SNCP Protection Switching

Prerequisites

Procedure

Third Party’s Trade Secret

My Followers