Hello all,
This document describe the steps needed in order to check the inverter communication with the management system using an iPhone.
1. Download and install the FusionSolar APP
Search for FusionSolar in one of the following app stores, download the installation package and install the FusionSolar App by following the instructions.
• App Store (iOS)
2. Disable mobile data from your phone
3. Connect your phone to the internal Wi-Fi of inverter “SUN2000L2101XXXXXXXXXXXXXXXX”. Use the password “Changeme” to access it.
4. Open Fusion Solar App
On FusionSolar main page, select “…” button (top right corner) -> Device Commissioning -> Choose Device -> Select the inverter
When the Phone connection to the inverter is done, choose “Installer” for user type and log in with the password “00000a”.
5. After login, on Home page choose Communication configuration -> Router connection settings – connect to the router Wi-Fi -> Management System configuration – check if the Domain name and Port number are accordingly with the picture below -> Connect
