Take V200R019 as an example.Table Working modes of an Eth-Trunk describes the working modes supported by an Eth-Trunk.
Link Aggregation Mode | Usage Scenario | |
Manual load balancing mode | This mode is used when the remote device does not support LACP. | |
LACP mode | Static LACP mode | This mode is used when the remote device supports LACP. The dynamic LACP mode is used only when CE series switches connect to servers. You are advised to deploy the static LACP mode in other scenarios. If the dynamic LACP mode is used in other scenarios, network loops may occur. |
Dynamic LACP mode | ||
It's worth noting that:
By default, an Eth-Trunk works in manual load balancing mode.
Ensure that the local and remote devices use the same Eth-Trunk working mode.
