CDR of lost / missed calls from u1911

Dear Marou

We can turn on the Switch for generating failure-specific CDRs on U1900, the steps are as follow:
by using the command in debug mode:
config softargu type 262 value 1
NOTE:
0: OFF (No CDRs are generated for any failures)
1: ALL (CDRs for all failures are generated)
2: FOR TRUNK ONLY (CDR for trunk failures are generated)

eSpace ECS V200R002C00SPC209 and later version, the system supports to generate text CDR files.

In the CDR Server window, choose CDR Console > Generate Text Bill or Not > Yes.

The system generates both text CDR and binary CDR files. The system will automatically place the text CDR files to the $\Bill\TxtBills directory (D:\Bill\TxtBills in this example). The variable $ is the CDR file path you have set.

Text CDRs are provided for third-party billing systems to read and parse. The BMU cannot parse text CDRs.

Restart the CDRServer.
Close the CDR Server CDR-Running window.
In the CDR Server window, click Exit to exit the CDRServer.
Double-click to start the CDRServer.
Install and configure the FTP or FTPS service on the CDRServer.