CCUD RJ45 uplink support
Created: Jul 15, 2021 06:51:04Latest reply: Jul 15, 2021 13:27:34
307
6
0
0
0
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
user_4305463
Created Jul 15, 2021 14:12:06
(0)
(0)
Oh I didn't know where to post it. Thanks for the confirmation, that's what I thought as well. I am trying to buy a second hand MA5616 and I was told that the CCUD could also do RJ45 uplinking and that they have customers using it like that. 
Chenxintao
Reply user_4305463 Created Jul 15, 2021 14:24:48
(0)
(0)
Hi, friend! You can refer to: https://forum.huawei.com/enterprise/en/how-to-quickly-seek-help-forum/thread/636663-100181 This operation is not supported. Please trust the information provided by the official channel. Thanks!
user_4305463
Reply Chenxintao Created Jul 15, 2021 14:35:02
(0)
(0)
What do you mean by this operation is not supported, RJ45 uplink? Yes thank you for confirming that
Chenxintao
Reply user_4305463 Created Jul 16, 2021 01:10:37
(1)
(0)
The CCUD control board of the MA5616 does not support the ETH/GE0 port as the upstream port for service traffic. The RJ45 port is used to connect the local maintenance and environment monitoring. |
All Answers
user_4305463
Created Jul 15, 2021 14:12:06
(0)
(0)
Oh I didn't know where to post it. Thanks for the confirmation, that's what I thought as well. I am trying to buy a second hand MA5616 and I was told that the CCUD could also do RJ45 uplinking and that they have customers using it like that.
Chenxintao
Reply user_4305463 Created Jul 15, 2021 14:24:48
(0)
(0)
Hi, friend! You can refer to: https://forum.huawei.com/enterprise/en/how-to-quickly-seek-help-forum/thread/636663-100181 This operation is not supported. Please trust the information provided by the official channel. Thanks!
user_4305463
Reply Chenxintao Created Jul 15, 2021 14:35:02
(0)
(0)
What do you mean by this operation is not supported, RJ45 uplink? Yes thank you for confirming that
Chenxintao
Reply user_4305463 Created Jul 16, 2021 01:10:37
(1)
(0)
The CCUD control board of the MA5616 does not support the ETH/GE0 port as the upstream port for service traffic. The RJ45 port is used to connect the local maintenance and environment monitoring. |
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
