Got it

Cannot upgrade CE5855 Switch to V200

Created: Apr 12, 2022 11:23:04Latest reply: Apr 12, 2022 13:04:21 125 2 0 0 0
  HiCoins as reward: 0 (problem unresolved)

Hi,

because of insufficient flash space I tried to upgrade the switch from V100 to V200 via BIOS menu

-> Update from ethernet interface -> Update system software with disk format.

The BIOS loads the firmware and updates NAND BOOT but after that I get


[ 1805.280000] The system has not registered successfully in 30 minutes£¬now reboot!


and the switch reboots into the old V100 firmware:


            #################################################################
            #################################################################
            #################################################################
            ##############################################
DONE
132847324 bytes transferred
TFTP download boot file from CE5855EI-V200R019C10SPC800.cc OK!

Updating NAND BOOT...
Warning: Please don't power off!
NAND BOOT updates succeeded.

Load system software through ethernet interface ...................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
...................................................................
............................[ 1805.280000]
[ 1805.280000] The system has not registered successfully in 30 minutes£¬now reboot!
..

*************************************************************
*  Copyright (C) <2012-2020> Huawei Technologies Co., Ltd.  *
*************************************************************

CloudEngine BIOS Version: 439  (Mar 06 2020 - 17:37:06)
Board Name ..................................... CE5855-48T4S2Q-EI
SDRAM Memory Initializing ...................... BEGIN
SDRAM Memory Size .............................. 2 Gbytes
SDRAM Memory Initializing ...................... DONE

Press CTRL+T for full memory test .............. skip


Starting ...

Press CTRL+B to enter BIOS menu or CTRL+E to boot DFX: 0
Boot Disk: flash
Startup File: CE5855EI-V100R006C00SPC600.cc
Try Times: 1


What can I do to upgrade the switch? The methode with "tftp xxx get firmware" is

not working because of less flash.

Regards,

Tom

Featured Answers

Recommended answer

jason_hu
Admin Created Apr 12, 2022 13:04:21

Hi friend!
1. If Loading the System Software Using the BIOS or BootLoader Menu, I suggest you refer to this upgrade step Loading the System Software Using the BIOS or BootLoader Menu, and then record each step to facilitate troubleshooting.
2. It is generally not recommended to use BIOS or BootLoader Menu to upgrade. If the Flash memory is not enough, it is recommended that you delete unnecessary information to meet the upgrade conditions.

View more
  • x
  • convention:

All Answers
Hi,
Kindly wait for a second, our engineers are processing your question and will feedback to you as soon as possible.
View more
  • x
  • convention:

Hi friend!
1. If Loading the System Software Using the BIOS or BootLoader Menu, I suggest you refer to this upgrade step Loading the System Software Using the BIOS or BootLoader Menu, and then record each step to facilitate troubleshooting.
2. It is generally not recommended to use BIOS or BootLoader Menu to upgrade. If the Flash memory is not enough, it is recommended that you delete unnecessary information to meet the upgrade conditions.

View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.