So the way I'm doing it is by going to forward rules > ipv4 port mapping. I selected my device and put the internal host, added a TCP/UDP protocol, and used 25565 as internal/external port numbers. Enable port mapping is also checked.
However, when I check if the port is open using a website, it says it's not and I have no idea why. Any help?
We don't know your detailed configuration, so we can't determine. You can refer to the following configuration examples:
Configuration Example
Enable the packets sent from the WAN side to the ONT whose destination WAN port number is 2000 to be forwarded to the LAN-side PC whose IP address is 192.168.100.20, and the port number is changed to 3000.
We don't know your detailed configuration, so we can't determine. You can refer to the following configuration examples:
Configuration Example
Enable the packets sent from the WAN side to the ONT whose destination WAN port number is 2000 to be forwarded to the LAN-side PC whose IP address is 192.168.100.20, and the port number is changed to 3000.
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."