Hello,

You can set port forwarding on the WAN Configuration page.

1. In the navigation tree on the left, choose Forward Rules > Port Mapping Configuration. In the pane on the right, click New. In the dialog box that is displayed, set the parameters related to port mapping, as shown in Figure 1.

2. Click Apply.

Port mapping indicates that the Intranet server is allowed to be open to the Extranet (for example, the Intranet provides the Extranet with a WWW server or FTP server). Port mapping is to map the Intranet host IP address and port ID to the Extranet IP address and the corresponding port ID so that users from Extranets can access the Intranet server.

With port mapping, the users cannot see the Intranet IP address. They see the Extranet IP address.

Please refer to the below link:

http://support.huawei.com/hedex/hdx.do?docid=EDOC1100062908&id=service_0127&text=Port Mapping Configuration&lang=en

Check whether your device is provided by an ISP and whether they have restrictions on you.

You can also refer to this link : 

How to configure port mapping on Huawei ONT

Thanks

Thanks for the reply but mine seems to have different parameters.

I don't know what to put on the "start trigger port" and "end trigger port" box.

Can someone tell me which app/website is being used here?

I have this problem too

Hi, everyone!

Stay tuned for the latest content:

How to configure Huawei ONT port mapping

Thanks!

I done this tutorial but didnt work

Can You Please Help me, i'm just trying to make a Game Server, i followed the instruction but when i went to check if the port was open on numerous checking sites they all say the ports closed

I'm facing the same issue, I've followed the tutorial and still no luck. Please help!

Hi, friend!
You need to check two things:
1. Check whether the forwarding port is enabled. Check whether the forwarding port conflicts with the well-known port.
2. If you are a home user, the forwarding port must pass through the ISP network. Check whether the ISP restricts forwarding.