Cannot bind the static route to the NQA group

Hello experts,

One of my customer are try to migrate the configuration from Cisco to Huawei router. During the configuration translation, he didn’t know how to translate the IP SLA into the Huawei corresponding configuration. So he asked me for the help.

I checked that the Cisco IP SLA is similar with the BFD, but it’s a private feature of Cisco. Unlike the BFD, IP SLA could allow the user to detect multi links rather than a single one, the router will determine the result based on all the sub detection.

For example, IP SLA bind three sub detections, it will judge the link down when both all the three links turn down.

I checked the documentation, it’s found the similar feature name NQA group, it could bind multi NQA test instances to judge the link state based on all the detections. But the problem is I didn’t find how to bind the NQA group to the static route. Is there a version requirement?

By the way, the router is AR1220, version V200R010.

Any suggestions would be appreciated.

Thanks.