Cannot Access HG8145V Web Interface
- x
- convention：
- Emotion(0)
|
Hello, aestrada58. You can use this command: set aclservicesrule Function This command is used to configure the access control permissions for the optical network terminal (device) Format set aclservicesrule [HTTPLanEnable value |HTTPWanEnable value |FTPLanEnable value |FTPWanEnable value |TELNETLanEnable value |TELNETWanEnable value |SSHLanEnablevalue |SSHWanEnablevalue |HTTPWifiEnablevalue |TELNETWifiEnablevalue]*
Thank you！ |
aestrada58
Created Apr 18, 2020 03:33:02
(0)
(0)
thank you liqiang185. how do i get to this command line? i am currently accessing the HG8145v via wifi. should i access via LAN? should i use a Telnet or SSH session? 
aestrada58
Reply liqiang185 Created Apr 18, 2020 12:49:25
(0)
(0)
thank you again for replying liqiang185. unfortunately, the HG8145v was provided by the telco (PLDT), so port 23 was blocked. i was unable to Telnet into the HG8145v. i resolved the problem by pressing the RESET button and returning the configuration to default. i am now able to access the HG8145v via HTTP. thank you again for your assistance. |
|
Hello, aestrada58. You can use this command: set aclservicesrule Function This command is used to configure the access control permissions for the optical network terminal (device) Format set aclservicesrule [HTTPLanEnable value |HTTPWanEnable value |FTPLanEnable value |FTPWanEnable value |TELNETLanEnable value |TELNETWanEnable value |SSHLanEnablevalue |SSHWanEnablevalue |HTTPWifiEnablevalue |TELNETWifiEnablevalue]*
Thank you！ |
aestrada58
Created Apr 18, 2020 03:33:02
(0)
(0)
thank you liqiang185. how do i get to this command line? i am currently accessing the HG8145v via wifi. should i access via LAN? should i use a Telnet or SSH session?
aestrada58
Reply liqiang185 Created Apr 18, 2020 12:49:25
(0)
(0)
thank you again for replying liqiang185. unfortunately, the HG8145v was provided by the telco (PLDT), so port 23 was blocked. i was unable to Telnet into the HG8145v. i resolved the problem by pressing the RESET button and returning the configuration to default. i am now able to access the HG8145v via HTTP. thank you again for your assistance. |
aestrada58
Created Apr 17, 2020 10:22:00
(0)
(0)
thank you for your quick response Unicef. i don't think the enterprise-grade AR-series routers firmware and the HG-series fiber-modem, WAP, routers for the home have the same firmware. but thank you nonetheless. |
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
