Can two electrical interfaces communicate normally when one interface is forcibly configured to work in full duplex mode and the other work in auto-ne

Latest reply: Apr 10, 2017 09:08:19 793 1 0 0
Can two electrical interfaces communicate normally when one interface is forcibly configured to work in full duplex mode and the other work in auto-negotiation mode
  • x
  • convention:

ms.america
Created Apr 10, 2017 09:08:19 Helpful(0) Helpful(0)

According to IEEE 802.3, when electrical interface A in auto-negotiation mode connects to electrical interface B that is forcibly configured to work in full duplex mode, the two interfaces can go Up. However, interface A starts to work in half-duplex mode, and interface B still works in full duplex mode. In this case, the interface working in half-duplex mode encounters error packets and packet loss due to collision of the physical link. Therefore, it is strongly recommended that you configure the interconnected electrical interfaces to work in the same mode. That is, enable auto-negotiation mode on both interfaces or configure the interfaces to work at the same speed and duplex mode by using the following commands:

< HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo negotiation auto
[HUAWEI-GigabitEthernet0/0/1] speed 100
[HUAWEI-GigabitEthernet0/0/1] duplex full
  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login