Can the number of authorized licenses be accumulated?

Hello,

In V200R006C10 and later versions, the number of authorized APs is accumulated. For example, if two ACs each have 64 authorized APs, the number of authorized APs is accumulated to 128 after VRRP hot backup is set up.

If you have any problems, please post them in our Community. We are happy to solve them for you!

The number of APs that can access an AC consists of :

- Default number of access APs when no license is loaded

- Number of access APs authorized by license

An AC6005 or AC 6605 allows acess of no AP by default when no license is loaded. After a licesne of 128APs is loaded the number of APs that can access an AC is 128. to expand the network cacaicty apply for another supporting 128 APs.

The background system will automaitically support the total number of resources items in the two licenses. After the new license is loaded on the AC, the number of APs that can access the AC is 256 (128+256=256).

An ACU2 allows access of 128 APs by default when no license is loaded. After a license for 256 APs is loaded the number of APs that can access an AC is 384 (128+256=384). To expand the network capacity, apply for another license supporting

128 APs. The background system automatically support the total number of resources items in the two licenses. After the new license is loaded on the ACU2, the number of APs that can access the ACU is 512 (384+128=512).

Note: 

The total number of license resource items cannot exceed the maximum number of resource items supported by an AC.

For details, see the wireless access controller license usage guide.

Step1: Login to the enterprise technical support website at http://support.huawei.com/enterprise

Step2: Click WLAN

http://forum.huawei.com/enterprise/en/huawei/m/ViewThread.html?tid=448477&lang=en

Nice question

Good

The number of APs that can access an AC consists of :

- Default number of access APs when no license is loaded

- Number of access APs authorized by license

An AC6005 or AC 6605 allows acess of no AP by default when no license is loaded. After a licesne of 128APs is loaded the number of APs that can access an AC is 128. to expand the network cacaicty apply for another supporting 128 APs.

The background system will automaitically support the total number of resources items in the two licenses. After the new license is loaded on the AC, the number of APs that can access the AC is 256 (128+256=256).