Can't login to the admin panel on a HG8546M

Created: Dec 10, 2016 03:05:12Latest reply: Feb 9, 2020 22:12:46 69811 24 0 1
  Rewarded Hi-coins: 0 (problem resolved)

Hello all!

This post is about the issue that I can't login to admin panel on a HG8546M. I got this Huawei HG8546M wireless router yesterday.

Issue description


The problem is that I was able to log in to the admin panel via 'telecomadmin & 'admintelecom' only once. I didn't change any settings, just casually browsed and logged out. However, no matter how many times I try, I can't login to the admin panel on a HG8546M. I have reset the router multiple times too, but still no success.

In addition, it throws a wireless ESSID named 'WirelessNet' which is also locked. I don't have a password for it either. 

I have found out that the default WiFi password of each router is different and is mentioned on the label at the back, but unfortunately it was removed before I got this router.

The only access I have is telnet. I can telnet using 'root' and 'admin', but it is too difficult to use.

Possible solution  


So, can anyhone please help me solve the issue that I can't login to the admin panel on a HG8546M and gain access to the admin panel of this router?

Maybe either of the following might help:

1. Other username or passwords that I can try?

2. Any method of reset?

3. Help with telnet so that I can reset the passwords from telnet (if possible).

  • x
  • convention:

Featured Answers
Created Oct 24, 2018 06:45:11 Helpful(1) Helpful(1)

Hi there!

set webuserpasswd


This command is used to set the password for a web user. 


set webuserpasswd instance instance password password  



instance instance
Indicates the instance ID of the web user.
Numeral type. Range: 1–2.

  • 1: normal user
  • 2: administrator

password password
Indicates the password.
Character string type, a string of 6-127 characters, which must contain two types of following characters: upper case letters, lower case letters, digits, and special characters.
  • x
  • convention:

Good Good Study Day Day Up
All Answers
gululu Admin Created Dec 12, 2016 06:23:29 Helpful(0) Helpful(0)

@Lemon please help!
  • x
  • convention:

Come on!
shenjingqq Created Aug 5, 2017 02:23:49 Helpful(1) Helpful(1)

Or you can try this:
  • x
  • convention:

user_3474541 Created Jul 12, 2019 22:36:49
I love you so much i love you so much , thank youuuuuuuuuuuu , big love for you  
SIMICHAN Created Jan 27, 2018 16:20:28 Helpful(1) Helpful(1)

telnet commands
amp add policy-stats pon
amp add policy-stats port
amp add stats gemport
amp clear policy-stats pon
amp clear policy-stats port
amp clear stats gemport
amp del policy-stats pon
amp del policy-stats port
amp del stats gemport
ampcmd show car all
ampcmd show car index
ampcmd show emac stat
ampcmd show flow all
ampcmd show flow index
ampcmd show log
ampcmd show queue all
ampcmd show queue index
ampcmd trace all
ampcmd trace cli
ampcmd trace dpoe
ampcmd trace drv
ampcmd trace emac
ampcmd trace emap
ampcmd trace eth
ampcmd trace gmac
ampcmd trace gmap
ampcmd trace onu
ampcmd trace optic
ampcmd trace qos
bbsp add policy-stats btv
bbsp clear policy-stats btv all
bbsp clear policy-stats wan
bbsp del policy-stats btv
Broadband debug
Broadband display
chipdebug clearall
chipdebug soc drop
chipdebug soc rx
chipdebug soc tx
clear amp pq-stats
clear file
clear lastword
clear pon statistics
clear poncnt dnstatistic
clear poncnt gemport upstatistic
clear poncnt upstatistic
clear port statistics
collect debug info
component delete all
debug dsp down msg
debug dsp msg
debug dsp up msg
debug ifm
debug qoscfg
debug rtp stack
debug sample mediastar
debugging dsp diagnose
debugging dsp para diagnose
debugging dsp record
debugging dsp t38diag
dect debug
display access mode
display amp policy-stats pon
display amp policy-stats port
display amp pq-stats
display amp stats gemport
display apmChipStatus
display batteryStatus
display bbsp stats btv
display bbsp stats wan
display bmsxml crc
display boardItem
display cwmp debug
display debug info dhcp6c
display debug info dhcp6s
display debug info pppoev6
display debug info ra
display deviceInfo
display dhcp client
display dhcp client all
display dhcp client6
display dhcp client6 all
display dhcp_em result
display dns proxy info
display dsp channel para
display dsp channel running status
display dsp channel status
display dsp chip stat
display dsp codec status
display dsp interrupt stat
display dynamic route
display epon ont info
display ethoam ma info
display ethoam md info
display ethoam mep info
display ethoam mep perf
display file
display filter rf
display flashlock status
display flow
display ftp config status
display inner version
display ip6tables filter
display iptables filter
display iptables mangle
display iptables nat
display iptables raw
display jb grid status
display jb para
display lanmac
display lastword
display log info
display macaddress
display machineItem
display memory info
display msg-queue
display nff log
display oaml2shell ethvlan
display onu info
display optic
display optmode
display patch information
display pon statistics
display poncnt dnstatistic
display poncnt gemport upstatistic
display poncnt upstatistic
display port statistics
display portstatistics
display pppoe_em result
display productmac
display progress load
display rf config
display rfpi
display rtp stack channel stat
display rtp stack chip stat
display rtp stack para
display rtp stack version
display sn
display ssh authentication-type
display ssh-hostkey fingerprint
display startup info
display swm bootstate
display swm state
display sysinfo
display syslog
display timeout
display timer
display usb devList
display version
display voice hs status
display voip dsp jbdata
display voip dsp para diagnose state
display voip dsp para diagnose statistics
display voip dsp tonedetect
display wan layer all
display wanmac
display wifi multicast
display wifi pa type
display wifichip
display wlanmac
display zsp version
dnsserver add static
dnsserver delete static
flush dnsserver cache
get battery alarm status
get ip conntrack
get mac agingtime
get ont oamfrequency
get opm switch
get optic debug info
get optic par info
get optic phy type
get optic txmode
get poncnt upgemport
get port config
get port isolate
get rogue status
get testself
get wlan advance
get wlan associated
get wlan basic
get wlan enable
get wlan stats
get wlan txpower
get wlan wps
igmp clear statistics
igmp get debug switch
igmp get flow info
igmp get global cfg
igmp get iptv
igmp get multilmac
igmp get port multicast config
igmp get statistics
igmp set debug switch
ip -6 neigh
ip -6 route
ip -6 rule
ip neigh
ip route
ip rule
load pack
load ssh-pubkey
make ssh hostkey
mgcp mg-config
mgcp mgc 1
mgcp mgc 2
mid get
mid off
mid set
napt cli
netstat -na
oamcmd clear log
oamcmd debug
oamcmd error log
oamcmd pdt show log
oamcmd show flow
oamcmd show log
omcicmd alarm show
omcicmd clear log
omcicmd debug
omcicmd error log
omcicmd mib show
omcicmd pdt show log
omcicmd pm show
omcicmd show flow
omcicmd show log
omcicmd show qos
qoscfg get
restore manufactory
route get default
save data
save log
session cli
set cwmp debug
set ethportmirror
set led
set opticdata
set port isolate
set ringchk
set timeout
set userpasswd
set voice announcement
set voicedebug
set voicedsploop
set voicelinetest
set voiceportloop
set voicesignalingprint
ssh authentication-type
stats clear
stats display
undo debugging dsp diagnose
undo debugging dsp para diagnose
undo debugging dsp record
undo debugging dsp t38diag
voice remote diagnose server set
voice remote diagnose set
voice set dect unreg
vspa clear rtp statistics
vspa debug
vspa display conference info
vspa display digitmap info
vspa display dsp running info
vspa display dsp state
vspa display dsp template info
vspa display mg if state
vspa display mg info
vspa display mgcp config
vspa display online user info
vspa display port status
vspa display profilebody info
vspa display rtp statistics
vspa display service log
vspa display signal scene info
vspa display signal scene list
vspa display user call state
vspa display user status
vspa reset
vspa shutdown mg
wap list
wap ps
wap top
  • x
  • convention:

sela1948 Created Feb 19, 2018 08:17:45 Helpful(0) Helpful(0)

user root
password admin

(before i use command set userpasswd

  • x
  • convention:

Rachael Created Apr 10, 2018 14:53:28 Helpful(0) Helpful(0)

Hello all,
I connected internet at home from ISP and ISP provided me "Huawei HG8546M". Its working very nicely but problem is when i want to access router and i give or in browser, nothing is happened or ISP did not allow to access router. so could you please tell me how can i access router.
Thank You..
  • x
  • convention:

Nei Created Apr 12, 2018 21:55:32 Helpful(0) Helpful(0)

Posted by user_3045779 at 2018-04-10 14:53 Hello all,I connected internet at home from ISP and ISP provided me "Huawei HG8546M". Its working ve ...
May you tell me where did you get the firmware? Because my Huawei HG8546M ONU not openning WAN Settings.
  • x
  • convention:

user_3082039 Created May 29, 2018 10:46:34 Helpful(0) Helpful(0)

Router number192.168.100.1 was not show the network.can u help me?
  • x
  • convention:

13sin Created Sep 22, 2018 15:28:23 Helpful(0) Helpful(0)

hlw. i need help. i am usinh HG8546M router. i entered ip then entered user name as root and password as admin.
it opened the page then i changed my ssid name and paasword and disabled ssid and broadcast so that i could hide my network bt then problem occured.
my router is not working. power an PON button is on but WLAN is not working.
i tried everything. even clicked reset button but also its not working.
can u help??
  • x
  • convention:

chenhui Admin Created Oct 10, 2018 07:30:04 Helpful(0) Helpful(0)

Posted by 13sin at 2018-09-22 15:28 hlw. i need help. i am usinh HG8546M router. i entered ip then entered user name as ro ...
you just closeed wifi by disable ssid.
suggest you connect router by using PC and cable, then log into the administrative page, enable the ssid,If you want to hide your wifi, choose not broadcast ssid but be sure DO NOT disable the ssid,this will shut down your wifi completely.
hope this can help you.
  • x
  • convention:

Back to list


You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits